Casio TK-3200 User Manual page 11

Electronic cash register
Table of Contents

Advertisement

Loading receipt paper
The same type of paper (45 mm 83 mm) is used for receipts and journal. Load the new paper before
first operating the cash register or when red paper appears from the printer.
REG2 X1
REG1
Z1
OFF
X2/Z2
RF
PGM
Important!
Never operate the cash register without paper. It can damage the printer.
TK-3200 User's Manual
Step 1
Use a mode key to set the
mode switch to REG1
position.
Step 2
Open the printer cover.
Step 3
Cut off the leading end of
the paper so it is even.
Step 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 5
Drop the paper roll gently
and insert paper to the
paper inlet.
Step 6
Press the
key until
about 20 cm to 30 cm of
paper is fed from the
printer.
Complete
Set the printer cover,
passing the leading end of
the paper through the paper
outlet. Close the printer
cover and tear off the
excess paper.
11
E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents