Before Operation - NEC PF51T31 Instruction Manual

Before Operation

Battery options
OPERATE
CH
MENU
VOL VOL
SLEEP CH-CALL
?
CH
TV/VIDEO
PICTURE/OK
INSERTING BATTERIES INTO THE REMOTE
CONTROL UNIT
Insert the batteries (two 1.5V, type AA)
MAINS CONNECTION
Plug the mains cable into the power socket with 240V/50Hz AC.
AERIAL CONNECTION
When using an outdoor aerial, it is usually connected to the set
by means of 75 ohm.
SWITCHING ON AND OFF
Switching on
Switch the set on with the MAIN POWER button(POWER),
and then CH UP or DOWN button on the front of the set.
Or use the OPERATE button or the CH UP/DOWN button or
one of the NUMBER buttons on the remote control.
NOTE : When switching power on, full picture and sound shall
appear in 6-8 seconds. This is to ensure optimum picure
stabilisation. This is indicated by a blinking LED indicator.
Switching off
Press the OPERATE button(
return the set to its stand by mode.
If you don't use the set for an extended period of time, turn
it off with MAIN POWER button on the set.
2
), on the remote control to