Connecting External Equipment - NEC PF51T31 Instruction Manual

Connecting external equipment

TV AND AV
Use the TV/VIDEO button on the remote control or on the front of the set to select one of
the following two options. Whenever the TV/VIDEO button is pressed, the on-screen
display will be changed as shown: AV1
CONNECTING TO A STEREO VCR
TV
AV IN AV OUT
ANT
VIDEO AUDIO VIDEO
L R
(AV OUT)
VIDEO L AUDIO R
VCR
RECOMMENDED CONNECTION TO A MONO VCR
TV
AV IN AV OUT
ANT
VIDEO AUDIO VIDEO
L R
(AV OUT)
VIDEO AUDIO
VCR
ALTERNATE CONNECTION TO A MONO VCR
TV
AV IN AV OUT
ANT
VIDEO AUDIO VIDEO
L R
(AV OUT)
VIDEO AUDIO
VCR
AV2 TV
Follow the connection as shown,
AUDIO
to have a stereo sound.
L R
Use a two wire RCA cable to make
AUDIO
a connection with a mono VCR.
L R
If L audio input of TV is connected
to Audio out of VCR, the sound will
come from both speakers.
If three RCA cable is used as the connector. Press the
'MODE' button on TV remote control several times to
AUDIO
change the mode.
L R
If L-input of the TV is connected to the audio out of
VCR, the mode will be
. STEREO : The sound will only come from one speaker.
. L-INPUT : The sound will come from both speakers.
. R-INPUT : The sound will not come at all.
If R-input of the TV is connected to the audio out of VCR,
the mode will be
. STEREO : The sound will only come from one speaker.
. L-INPUT : The sound will not come at all.
. R-INPUT :The sound will come from both speakers.
3