Daily Use - NEC PF51T31 Instruction Manual

DAILY USE

PROGRAMME SELECTION
Direct selection
Use remote control NUMBER 0...9 buttons.
For two digits programme numbers, press the
button for the second digit within 2.5 seconds.
Up/Down controls
CH
Use CH UP/DOWN buttons of the remote
VOL VOL
control unit or on the front of the set.
CH
SOUND CONTROL
CH
Volume adjustment
VOL VOL
Use VOLUME UP/DOWN buttons of the remote
control unit or on the front of the set.
CH
Mute
Turn sound off by pressing the remote control
MUTE ( ) button. The logo (
Sound returns by pressing the same button once
more.
Forced Mono, Bilingual language
If you are unable to get a good sound on a
channel due to a poor stereo broadcasting
MODE
signal, you can change from stereo to mono
transmission by pressing remote control MODE
button. Then the programme status concerning
this programme indicates "Mono" (in red colour).
On the other hand, during a bilingual
programme, MODE button allows you to hear
the second language. To return to initial state,
press the MODE button once more. For other
adjustments (bass, treble, balance and sound
effect) see sound menu page 10.
) is displayed.
7