Shooting In Zoom Macro Mode - Sea & Sea 2G User Manual

Shooting in Zoom Macro Mode

1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2
Press the MENU/OK button.
• The scene mode selection screen appears.
3
1
Press the !"#$ buttons to select [Zoom Macro].
4
Press the MENU/OK button.
5
Press the z (Telephoto) button or Z (Wide-angle)
button.
• The magnification appears on the picture display.
6
Compose your picture and half-press the shutter
release button.
7
Full-press the shutter release button.
Note ----------------------------------------------------------------------------------------------
• You can shoot close-ups using the zoom macro within the following distances.
Approx. 1 cm
(from the front of the lens)
• If [Pic Quality/Size] is set to 4000 × 3000, you can also set [Digital Zoom Img] to [Auto
Resize] and auto resize zoom is activated. (GP.198)
92
Shooting range: Approx. 17 mm × 13 mm
(when digital zoom is not used)
Shooting range: Approx. 4.2 mm × 3.2 mm
(when 4.0× digital zoom is used)