Setting The Flash Timing (Synchro Settings) - Sea & Sea 2G User Manual

Setting the Flash Timing
(Synchro Settings)
You can select the timing for which the flash fires from the two
settings shown below. The default setting at the time of purchase is
[1stCurtain].
Setting
1
1stCurtain
2ndCurtain
1
Displaying the shooting menu.
• For the operating procedure, see P.97.
2
Press the " button to select [Synchro Settings] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
For information on how to use the flash, see P.44.
120
Description
The flash fires right after the exposure starts. Select this setting for normal
shooting.
The flash fires right before the exposure finishes. Since the shot is first
exposed to the regular amount of light and then the flash fires right before
the exposure ends, this setting can be used to achieve more natural
expressions of light trails and motion blurs in situations such as when
shooting moving subjects at slow shutter speeds.