Sea & Sea 2G User Manual page 64

Note ---------------------------------------------------------------------------------------------------
• If the camera is tilted too much, the mark on the level indicator becomes red and
indicates the opposite end of the direction in which the camera is tilted.
• When shooting with the camera positioned vertically, the level function can be used
to determine whether the image is vertically level.
Caution-----------------------------------------------------------------------------------------------
• If the camera is tilted too far forward or backward, or it cannot be determined whether
the camera is level, the level indicator becomes red.
• During grid guide, no display, or when the picture display is turned off (except when
an LCD viewfinder VF-1 is attached)(GP.57), the level sound is emitted, but the
level indicator is not displayed. When [Level Setting] is set to [Disp + Snd], only the
level sound is emitted.
• The level function is not available if the camera is held upside down, when recording
movies, and during interval shooting.
• The level function becomes less accurate when the camera is moving or when
shooting in an environment subject to moving, such as on a amusement ride.
• No level sound is emitted when [Level Setting] is set to [Disp + Snd] or [Sound] and
[Vol. Settings] is set to [
• Use this function as reference so see if images are level when shooting images. The
accuracy of the level when using the camera as a level cannot be guaranteed.
62
] (Mute) (GP.193).