Adjusting The Brightness Of The Picture Display (Lcd Brightness) - Sea & Sea 2G User Manual

Adjusting the brightness of the
picture display (LCD Brightness)
To adjust the brightness of the picture display, follow the steps
below.
1
Display the setup menu.
• For the operating procedure, see P.178.
2
Press the " button to select
[LCD Brightness] and press
the $ button.
• The screen for setting the brightness
appears.
3
Press the !" buttons to
adjust the brightness.
• Move the slider on the LCD brightness
5
adjustment bar down to make the
picture display darker. Move it up to
make it brighter. The brightness of the
picture display changes as the slider
is moved along the bar.
4
When you reach the desired
brightness, press the MENU/OK button.
• The display returns to the setup menu.
5
Press the MENU/OK button.
Caution------------------------------------------------------------------------------------------
You cannot adjust the brightness of the LCD viewfinder (VF-1).
182
Cancel Ok