Loading The Battery And Sd Memory Card - Sea & Sea 2G User Manual

Loading the Battery and SD Memory Card

The rechargeable lithium-ion battery (sold separately) can be
used to power this camera. This battery is convenient because the
battery power lasts long and it can be used over and over again
by recharging. If the camera is already turned on, make sure it is
turned off before loading the battery and card.
1
Slide the release lever toward
"OPEN" to open the battery/
card cover.
2
Make sure the SD memory
card is facing the right way
and then push the card all the
way in until it clicks.
• The rechargeable lithium-ion battery
may be inserted first.
3
Insert the rechargeable
lithium-ion battery.
• Press the latch with the battery and
insert the battery all the way into the
battery compartment.
• When the rechargeable lithium-ion
battery is loaded in place, it is
locked with the latch.
4
Close the battery/card cover
and slide the release lever in
the opposite direction of
"OPEN" to lock it in place.
30
1
2
Logo side
1
2