Appendices; Troubleshooting; Error Messages - Sea & Sea 2G User Manual

7 Appendices

Troubleshooting

Error Messages

If an error message is displayed on the screen, take the
corresponding action.
Error Message
Insert Card
Set Date.
File Number Over Limit
Unmatched File
Insufficient Memory.
Continue?
Protected
Card Is Write- Protected.
Print settings cannot be set
for this file.
Insufficient Memory/
Capacity short
Format internal memory
Format card
Card Error
Writing Data
No File
Cannot Record
Cause and Action
No card is loaded. Insert a card.
The date is not set. Set the date.
The file number limit has been exceeded. Use another card.
The camera cannot display this file. Check the file contents on
your computer, and then delete the file.
Because there is not sufficient capacity on the card, all the files
cannot be copied. Use another card.
You are trying to delete a protected file.
The card is locked (write-protected). Unlock the card.
Print settings cannot be set for this file (movie, etc.).
Files cannot be stored. Make sure there is enough free space or
delete unwanted files.
The image print number limit has been exceeded. Select an image
and set the number to 0.
You must format the internal memory.
The card is not formatted. Format the card with this camera.
Reformat the card. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card.
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
The storage capacity is 0. Switch to another card or the internal
memory.
Refer to
P.30
P.209
P.207
P.208
-
P.28
P.152
P.29
-
P.53
P.180
P.181
P.175
P.181
P.180 7
P.180
-
-
P.28
227