Changing The File Name Setting (Sequential No.) - Sea & Sea 2G User Manual

Changing the File Name Setting
(Sequential No.)
When you shoot a still image, it is stored on an SD memory card or
in the internal memory with a consecutively numbered file name
that is automatically assigned.
When you switch SD memory cards, you can set your camera to
continue consecutive numbering from the previously loaded card.
Available Settings
On (Continue numbering)
*Default setting
Off (Do not continue
numbering)
To change the file name setting, follow the steps below.
1
Display the setup menu.
• For the operating procedure, see P.178.
2
Press the " button to select [Sequential No.] and press
the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
Description
File names are automatically assigned to still images you take, in
the format of "M" followed by seven digits, from M0010001.jpg to
M9999999.jpg.
With this setting, file numbering is continued from one card to the
next.
File numbering is assigned, from MG0001.jpg to MG9999.jpg, for
each SD memory card.
When the file name reaches MG9999, no more data can be
recorded to that card.
5
207