Connecting The Power Supply - Brother P-Touch QL-500 Operation Manual

5 Connecting the power supply

1
Insert the power plug into the outlet.
•
Before inserting the plug, check the outlet is for 120
VAC.
•
Locate the printer near the outlet where the power
plug can be pulled out easily.
•
When inserting or pulling out the power cord, be sure
to hold the power plug.
When using the printer on Windows
before installing software.
Do not connect the printer to the PC until the message that prompts the connection
when installing the printer driver.
When connecting the printer to the PC
before installing the printer driver, the dialog
box shown right is displayed. At that time,
click [Cancel] and disconnect the USB
cable. Then, install the printer driver. For
details, refer to
in page 27.
"3. Installing the software"
®
, do not connect the printer to the PC
23
STEP
1
STEP
2
STEP
3
STEP
4