Pfaff cvreative 3.0 Owner's Manual page 95

Common Embroidery
stitch-out pop-ups
Embroidery unit calibration
asks you to slide off the hoop and clear the machine
also be reminded to disengage the IDT system and
™
attach the correct embroidery presser foot.
Note: It is very important to remove the hoop, otherwise
the hoop or the embroidery unit may be damaged while
calibrating.
Attach correct hoop
not match the size displayed on screen, the machine
hoop setting.
and touch select hoop icon.
Bobbin thread low - move to bobbin position?
an opportunity to plan where to stop embroidering
and change the bobbin.
continue embroidering without closing the bobbin
hoop position tab opens. Replace the empty bobbin
your foot control to continue embroidering.
9:9