Pfaff cvreative 3.0 Owner's Manual page 37

Presser foot up and extra lift toggle
Presser foot down and pivot toggle
Start/stop
Press this button to start or stop the machine
without using the foot control. Press the button
once to start and press it again to stop.
Thread snips
Press to cut both needle and bobbin thread
immediately.
will complete the stitch and cut the threads before
needle and bobbin threads and raises the presser
foot and the needle.
Note: Threads are cut automatically when buttonholes
are sewn with the Sensormatic buttonhole foot.
The presser foot will not raise after thread snips if
automatic presser foot lift has been deactivated in the
settings menu.
Thread snips performed by the machine can be cancelled
in the settings menu.
In embroidery mode the threads are cut and the presser
foot raised. The needle thread only cuts automatically at
and bobbin threads are cut automatically.
Start/stop
Reverse indicator Action indicator
Reverse button
Reverse button
pressed.
end and tapering stitches.
Reverse indicator
Action indicator
indicator stays lit until the action is done.
Immediate tie-off
Stitch restart
Speed control
Needle up/down
Thread snips
3:7