Table of Contents
Advertisement
Threading the machine
Make sure that the presser foot is raised and the
needle is in the up position.
cap of the right size.
Note: Hold thread with both hands to prevent it from
slacking while threading. This ensures that the thread
will be positioned properly in the threading path.
underneath the
on the
threading slot.
slot to the
Needle threader
through the needle eye.
hook pulls the thread through the needle eye
and forms a loop behind the needle. Pull the
thread loop out behind the needle.
Note: The needle threader is designed to be used for size
70-120 needles. You cannot use the needle threader for
size 60 needle or smaller, the wing needle, twin needle or
triple needle. There are also some optional accessories that
require manual threading of the needle.
The bobbin cover can be used as a magnifying glass.
B
C
D
E
B
C
A
F
G
A
2:5
Advertisement
Table of Contents
