Install Other Internal Connectors - Foxconn D250S User Manual

2-2 Install other Internal Connectors

Power Connectors
This mother�oard uses an ATX power supply. In order not to damage any device, make sure all the
devices have �een installed properly �efore applying the power supply.
24-pin ATX power connector : PWR2
PWR� is the ATX power supply connector. Make sure that the power supply ca�le and pins are
properly aligned with the connector on the mother�oard. Firmly plug the power supply ca�le into the
connector and make sure it is secure.
24
1�
PWR�
!
We recommend you using a 24-pin power supply.
If you are using a �0-pin power supply, you need
to align the ATX power connector according to
the picture.
4-pin ATX 12 V Power Connector : PWR1
Connect the 4-pin ATX 12V power supply to PWR1 and provides power to the CPU.
3
+1�V
4
PWR1
Pin #
13
1
1
GN�
2
Definition
1 3.3V
� 3.3V
3 GN�
4 +�V
� GN�
6 +�V
� GN�
8 Power Good
9 +�V SB(Stand �y +�V)
10 +1�V
11 +1�V
1� 3.3V
Pin #
1
�
3
4
9
Pin # Definition
13 3.3V
14 -1�V
1� GN�
16 PS_ON(Soft On�Off)
1� GN�
18 GN�
19 GN�
�0 NC
�1 +�V
�� +�V
�3 +�V
24 GN�
Pin No. 24
�0-Pin Power
Definition
GN�
GN�
+1�V
+1�V