Install The Memory; Power - Foxconn D250S User Manual

2-1 Install the Memory

!
Read the following guidelines �efore you �egin to install the memory :
■ Make sure that the motherboard supports the memory. It is recommended that memory
of the same capacity, �rand, speed, and chips �e used.
■ Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
■ Memory modules have a foolproof design. A memory module can be installed in only
one direction. If you are una�le to insert the memory, switch the direction.
■ Be sure to install ��R3 �IMMs on this mother�oard.
If you take a look at front side of memory module, it has asymmetric pin counts on �oth sides
separated by a notch in the middle, so it can only fit in one direction. Follow the steps below to
correctly install your memory modules into the sockets.
1.Place the memory module onto the
socket, then push it down firmly.
�.The clips at �oth ends of the socket will
snap into place when the memory moule
is securely inserted and pressed.
8
Notch