Ide Configuration - Foxconn A79A-S User Manual

IDE Configuration

IDE Configuration
OnBoard PCI IDE Controller
OnChip SATA Channel
OnChip SATA Type
SATA IDE Combined Mode
Combined Mode Option
JMicron 36x ATA Controller
↑↓←→:Move Enter:Select
► OnBoard PCI IDE Controller
[Disabled]: Disable the integrated IDE controller.
[Primary]: Enable only the primary IDE controller.
► OnChip SATA Channel
[Disabled] : Disable SATA ports 0,1, 2, 3.
[Enabled] : Enable SATA ports 0,1, 2, 3.
► OnChip SATA Type
This item is used to set the operating mode of your SATA ports.
Options : [Native IDE]; [RAID]; [Legacy IDE]; [IDE->AHCI].
[Native IDE] - This configures the SATA ports to support native IDE mode.
[RAID] - When you enable RAID, it means all your SATA drives must also support AHCI.
[Legacy IDE] - This configures the SATA ports to support legacy IDE mode which is running
for old Windows system.
[IDE->AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the reg-
ister level interface for a Host Controller for Serial ATA. The specification includes a description
of the hardware/software interface between system software and the host controller hardware.
AHCI provides more advanced features including SATA features, but some SATA drives may
not support AHCI, unless they are labeled with AHCI support in its specification.
If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI,
then you can select IDE option to have fair performance (only PATA, SATA level), or you can
select AHCI to get its best performance.
► SATA IDE Combined Mode
[Disabled] : Disable SATA ports 4, 5.
[Enabled] : SATA ports 4, 5 are used to simulate two additional IDE ports. You can select from
PATA or SATA as the Primary IDE through the next "Combined Mode Option" set-
ting. Four drives are displayed as IDE Channel 0 Master/Slave and IDE Channel 1
Master/Slave in "System Information" menu.
► Combined Mode Option
When "SATA IDE Combined Mode" is enabled, you can choose :
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
+/-/:Value
F9:Optimized Defaults
IDE Configuration
[Both] [Both] Disabled: Disable the
[Enabled] I integrated IDE
[Native IDE] controller.
[Enabled] Primary: Enable only
[SATA as Primary] the Primary IDE
[IDE Mode] Controller.
F10:Save ESC:Exit
40
Help Item
F1:General Help