System Information - Foxconn A79A-S User Manual

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
System Time
System Date
► Primary IDE Master
► Primary IDE Slave
► Secondary IDE Master
► Secondary IDE Slave
► Third IDE Master
► Third IDE Slave
► Fourth IDE Master
► Fourth IDE Slave
► Fifth IDE Master
► Sixth IDE Master
Floppy A
Halt On
Keyboard
Mouse
Floppy
↑↓←→:Move Enter:Select
► System Time
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Primary/Secondary/Third/Fourth IDE Master/Slave,Fifth/Sixth IDE Master
While entering setup, BIOS automatically detects the presence of IDE devices. This item
displays the drive information of IDE devices. Please refer to mapping table in next page.
► Floppy A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [360KB, 5
[Disabled].
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse or floppy can result in system halt. The
System Information
[17 : 33 : 49]
17
[Tue , 04/29/2008]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[1.44 MB 3
[All Errors But ...]
[Disabled]
[Disabled]
[Disabled]
+/-/:Value F10:Save ESC:Exit
1 / "], [1.2MB, 5 1 / "], [720KB, 3
4 4
halt condition can be enabled/disabled in the next three settings.
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system time.
/ '']
1
2
F9:Optimized Defaults
1 / "], [1.44MB, 3
2
22
Help Item
F1:General Help
1 / "], [2.88 MB, 3 1
2
/ "] and
2