Foxconn A79A-S User Manual page 43

This item is used to select the Generation II speed mode of PCI Express slots. Select [Auto],
Gen2 High Speed Mode
Gen2 De-Emphasis
Link ASPM
Link Width
Slot Power Limit, W
↑↓←→:Move Enter:Select
RC will only advertize Generation II capability; Select [Software Initiated], the speed mode
is determined by software initiated; Select [Advertised RC], the speed mode is determined
by hardware initiated; Select [Disabled], BIOS will turn off Generation II speed mode of PCI
Express slots.
► Gen2 De-Emphasis
This item is used to depress noises of PCI Express slots when working in Generation II Speci-
fication mode.
► Link ASPM
This item is used to select the link mode between ASPMs.
► Link Width
This item is used to set the link width between PCI Express slots.
► Slot Power Limit, W
This item is used to adjust the power limit of PCI Express slots. You can use [+]/[-] to change
the value or directly input a value from 0 to 255.The default option is [75].
PCIe 1X Port 1
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
+/-/:Value
F9:Optimized Defaults
PCIE 16X Port 1
[Auto]
[-3.5dB]
[Disabled] "Auto" - RC only
[Auto] advertize Gen2
[75] capability.
F10:Save ESC:Exit
36
Help Item
F1:General Help