System Information - Foxconn M61PMX series User Manual

Standard Information
This submenu is used to set up the standard BIOS features, such as the date, time, IDE channel
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
Date (mm:dd:yy)
Time (hh:mm:ss)
► Primary Master
► Primary Slave
► SATA Port 1
► SATA Port 2
Driver A
Halt On
Configure SATA as
Install Memory
Memory Speed
BIOS ID
↑↓→←:Move Enter:Select
► Date - <weekday><month><date> <year> format
Day—weekday from Sun. to Sat., automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.
Use <Enter>, <Tab> keys to select a field. Use <+>, <->, <PageUp> or <PageDown> to select
a value.
► Time - <hour> : <minute> : <second> format
This item allows you to configure the desired time. Use <Enter>, <Tab> to move forward and
select a field. Directly input a value or use <PageUp>, <PageDown>, <+> or <-> to select a
value.
► Primary Master/Slave
These categories identify the hard disks connected to the PATA and SATA ports in the system.
In each channel's display, you can press [Enter] to go to its submenu. You can further config-
ure specific drive settings. [None] and [Auto] settings allow you to enable or disable this drive.
[None] means no HDD is installed or set, and [Auto] means the system can auto-detect the
hard disk when booting up. In Access Mode setting, selections of [CHS], [LBA], [Lage] and
[Auto] can help you to select hard drive for legacy compatibility.
Award (Phoenix) BIOS is supporting 3 HDD modes : CHS, LBA and Large.
CHS For HDD <528MB
LBA For HDD >528MB & Supporting LBA (Logical Block Addressing)
Large For HDD>528MB but not supporting LBA
Note: Set to [Auto] , the system can detect the hard disk and select the HDD mode
automatically. Suggest you select this option.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Wed,Mar 12 2008
18 : 30 : 59
[ None]
[None]
[ST3160815AS]
[TSSTcorp CDDVDW TS-H]
[ 1.4MM,3.5 in]
[All , But Keyboard]
[IDE]
2048MB
800 MHz
MCP61M01.02.F1.D.03
+/-/PU/PD:Value F10:Save
F5: Previous Values F7: Setup Defaults
20
Item Help
Menu Level ►
Chage the day,month
year and century
ESC:Exit F1:General Help