Step 4: Connect Wiring Block To Door Intercom Adapter - TMC Epic 800-EFM User Manual

Installing Your Door Intercom Adapter

Step 4: Connect Wiring Block to Door Intercom Adapter

1 Locate 8-wire Cord
Find the 8-wire cord which was enclosed with
your Door Intercom Adapter. Note that this is a
black cord which is approximately 6 inches
long.
Note that you must use this cord, as any other
cord may not work.
2 Connect Cord to Feature Module
Plug one end of the 8-wire cord into the jack on
the back of the feature module labeled "TO
WIRING BLOCK."
3 Connect other end of Cord to Wiring
Block
Plug the other end of the 8-wire cord into the
wiring block which was supplied with your fea-
ture module.
17