Step 3: Connect Power Cord - TMC Epic 800-EFM User Manual

Installing Your Door Intercom Adapter

Step 3: Connect Power Cord

1 Connect Power Cord to Module
Plug the AC power cord into the adapter jack at
the rear of the Feature Module. Thread the
power cord around the strain relief tab.
2 Connect Power Cord to Wall Outlet
Plug the AC adapter into an electrical outlet not
controlled by a wall switch.
3 Make Sure that Status Indicator lamp
is Blinking
This indicates that the feature module is prop-
erly connected to electrical power.
The blinking pattern for the Door Intercom
Adapter is a slow on and off blinking.
16