Jeep Wrangler 2013 User Manual page 47

Menu
• Press the "MENU" hard-key to access the System Setup menu and the My Files
menu.
• Press the "MENU" hard-key in an active mode (SAT, CD, AUX, etc.) in order to
change mode specific settings.
Equalizer, Balance And Fade
Audio Control Menu
• Press the "AUDIO" hard-key on the
right side of the radio.
• Use either the arrow soft-keys or the
cross-hair on the screen to change Bal-
ance and Fade. The "CENTER" soft-
key resets the settings.
• Touch the "Equalizer" soft-key and use either the arrow soft-keys or the sliders on
the screen to adjust BASS, MID, and/or TREBLE.
Display Settings
• Press the "MENU" hard-key and touch
the "Display Settings" soft-key to ac-
cess the Display Settings menu.
• Select the "Daytime Colors" soft-key to
switch to manual daytime mode and to
adjust the brightness of the display
using daytime colors.
• Select the "Nighttime Colors" soft-key to switch to manual nighttime mode and to
adjust the brightness of the display using nighttime colors.
• Select the "Auto Color Mode" soft-key to switch to automatic daytime/ nighttime
mode and to control the brightness of the display using the dimmer switch of the
vehicle.
• Touch the "EXIT" soft-key to save your settings.
ELECTRONICS
45