Wheel And Wheel Trim Care; Exterior Bulbs - Jeep Wrangler 2013 User Manual

MAINTAINING YOUR VEHICLE
• Overloading of your tires is dangerous. Overloading can cause tire failure,
affect vehicle handling, and increase your stopping distance. Use tires of the
recommended load capacity for your vehicle. Never overload them.
• Improperly inflated tires are dangerous and can cause collisions. Under-
inflation is the leading cause of tire failure and may result in severe cracking,
component separation, or "blow out". Over-inflation reduces a tire's ability to
cushion shock. Objects on the road and chuck holes can cause damage that
results in tire failure. Unequal tire pressures can cause steering problems. You
could lose control of your vehicle. Over-inflated or under-inflated tires can
affect vehicle handling and can fail suddenly, resulting in loss of vehicle
control.

WHEEL AND WHEEL TRIM CARE

• All wheels and wheel trim, especially aluminum and chrome plated wheels, should
be cleaned regularly with a mild soap and water to prevent corrosion.
• To remove heavy soil and/or excessive brake dust, use MOPAR
equivalent or select a non-abrasive, non-acidic cleaner.
Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use
oven cleaner. These products may damage the wheel's protective finish. Avoid
automatic car washes that use acidic solutions or harsh brushes that may damage
the wheel's protective finish. Only MOPAR
recommended.

EXTERIOR BULBS

Bulb Number
3157
LED (*)
PSX24W
3157
168
H13
194
* CHMSL is not serviceable. It is a LED lamp. To replace the LED, the entire CHMSL
assembly must be replaced.
120
WARNING!
CAUTION!
® Wheel Cleaner or equivalent is
LIGHT BULBS – Exterior
Backup, Tail, Stop, Turn Lamp
Center High-Mounted Stop Lamp (CHMSL)
Fog Lamp – If Equipped
Front Park/Turn Signal
Front Side Marker
Headlamp – Low Beam
License Lamp
Wheel Cleaner or
®