Table Of Contents; About The Quick Start Guide; Before Use - Kenwood KDC-U7056DAB Quick Start Manual

Contents
About the Quick Start Guide.......................... 2
Before use ............................................................. 2
Appendix .............................................................. 4
Preparations ......................................................... 4
General operations ............................................ 6
Playing music (CD/USB/iPod)......................... 7
Listening to the radio/Digital radio ............. 8
Hands-free phoning .......................................... 9
Before installation ............................................10
Connecting wires to terminals ....................12
3 way speaker system setup ........................14
Installing/Removing the unit .......................16
Installing the Microphone unit ..................17
Installing the Digital radio antenna...........17
Specifications .....................................................21
About the Quick Start
Guide
This Quick Start Guide describes basic
functions of this unit.
For functions not described in this Guide,
refer to the Instruction Manual on the
following website:
manual.kenwood.com/edition/im362/
To refer to the Instruction Manual, a browser
such as Internet Explorer® 7 or later, Firefox®
3.6 or later, Chrome™ 20 or later, Safari® 5.1
or later, iOS Safari® 4.0 or later, or Android™
2.2 or later is required.
2 | Quick Start Guide

Before use

# WARNING
To prevent injuries or a fire, take
the following precautions:
• Stop the car before operating the unit.
• To prevent a short circuit, never put or
leave any metallic objects (such as coins
or metal tools) inside the unit.
!
CAUTION
• Adjust the volume so that you can hear
sound outside the car. Driving with the
volume adjusted to a too high level may
cause an accident.
• Wipe off the dirt on the panel with a dry
silicon or soft cloth.
Failure to observe this precaution may
result in damage to the monitor or unit.
Cleaning the connector
The unit may not function properly if the
connector between the unit and faceplate
are dirty. Detach the faceplate and clean the
connector with a cotton swab gently, being
careful not to damage the connector.
Condensation
When the car is air-conditioned, moisture
may collect on the laser lens. This may cause
disc read errors. In this case, remove the disc
and wait for the moisture to evaporate.
Notes
• If you experience problems during
installation, consult your Kenwood dealer.
• When you purchase optional accessories,
check with your Kenwood dealer to make
sure that they can work with your model
and in your area.
• Characters that conform to ISO 8859-1
can be displayed.
Connector