Display Settings; Configuring The Maps; General Map Settings; Advanced Map Settings - Garmin eTrex Touch 25 Owner's Manual

Display Settings

Select Setup > Display.
Backlight Timeout: Sets the length of time before the backlight turns off.
Screen Capture: Allows you to save the image on the device screen.
Battery Save: Saves the battery power and prolongs the battery life by turning off the screen when the backlight
times out (Turning On Battery Save Mode, page

Configuring the Maps

You can enable or disable the maps currently loaded on the device.
Select Setup > Map > Configure Maps.

General Map Settings

Select Setup > Map > General.
Detail: Sets the amount of detail shown on the map. Showing more detail may cause the map to redraw more
slowly.
Orientation: Adjusts how the map is shown on the page. The North Up option shows north at the top of the
page. The Track Up option shows your current direction of travel toward the top of the page. The Automotive
Mode option shows an automotive perspective with the direction of travel at the top.
Dashboard: Sets a dashboard to display on the map. Each dashboard shows different information about your
route or your location.
Shaded Relief: Shows detail relief on the map (if available) or turns off shading.
Auto Zoom: Sets the display to automatic zoom.

Advanced Map Settings

Select Setup > Map > Advanced Setup.
Map Speed: Adjusts the speed at which the map is drawn. A faster map drawing speed decreases the battery
life.
Guidance Text: Sets when the guidance text is shown on the map.
Select Vehicle: Sets the position icon, which represents your position the map. The default icon is a small blue
triangle.
Zoom Levels: Adjusts the zoom level at which map items appear. The map items do not appear when the map
zoom level is higher than the selected level.
Text Size: Sets the text size for map items.

Custom Data Fields and Dashboards

Data fields display information about your location or other specified data. Dashboards are a custom grouping
of data that can be helpful to a specific or general task, such as geocaching.

Enabling the Map Data Fields

1 From the map, swipe up from the bottom of the screen and select
2 Select a data field.

Customizing the Data Fields

Before you can change the map data fields, you must enable them
You can customize the data fields and dashboards of the map, compass, trip computer, and altimeter pages.
1 From a page that displays data fields, select a data field.
2 Select a data field category and a data field.
20
27).
> Setup Map > General > Dashboard.
(Enabling the Map Data Fields, page 20).
Customizing the Device