Getting Started
Step 3 : TV channel
programming
Before the DVD recorder can start
recording the TV channel programs,
you need to search for the available TV
channels and store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
DVD recorder, the TV and Satellite
Receiver/ Cable Box (if any) and switched
them on.
Tuner settings can only be changed
when there is no disc in the disc tray.
SYSTEM
SETUP
OK
TIPS:
Press to go back to previous menu item.
Press SYSTEM-SETUP to exit the menu.
4
(continued)
A
B
C
Automatic TV channel search
This function will automatically scan all
the receivable analog local TV channels
and store these channels on the DVD
recorder.
Press SYSTEM-SETUP on the remote
control.
The system menu appears on the TV.
Use keys to highlight
{ System Setup - Channel Setup }
and press OK.
Use keys to highlight { Channel
Search } and press OK.
The automatic TV channel search starts.
This process may take several minutes.
Once complete, the total number of
channels found appears on the TV.