Connecting To A Vcr And Cable Box/Satellite Receiver - Philips DVDR3355 User Manual

Optional Connections
SPLITTER
Antenna/cable TV
signals
Connecting to a VCR and
Cable Box/Satellite Receiver
A splitter (not supplied) is required for
this connection.
1
Connect the Antenna/Cable TV signal to a
splitter. Then connect the RF coaxial
cables from the splitter to the antenna
input (RF IN) jack on the VCR and the
Cable Box/Satellite Receiver.
2
Use an RF coaxial cable to connect the
antenna output (RF OUT) jack on the
VCR to the antenna input jack on the TV.
3
Use the supplied RF coaxial cable to
connect the antenna output (RF OUT)
jack on the Cable Box/Satellite Receiver
to the ANTENNA
recorder.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from
the power outlet.
18
001_033_dvdr3355_37A_eng5
(continued)
1
VHF/UHF
OUT
RF IN
VIDEO
OUT
AUDIO
L
AUDIO
VHF/UHF
R
RF OUT
IN
3
2
jack on the DVD
18
Back of aVCR (Example only)
IN
VIDEO
IN
AUDIO
L
AUDIO
R
4
OUT
VIDEO AUDIO
RF S-VIDEO
R L
5
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
4
Use the audio/video cables to connect
VIDEO/AUDIO IN-EXT on the DVD
recorder to the matching VIDEO/AUDIO
output jacks on the VCR.
5
Use the audio/video cables to connect
VIDEO/AUDIO OUT -2 on the DVD
recorder to the matching VIDEO/AUDIO
input jacks on the TV.
Helpful Hints:
– You may use the S-VIDEO (Y/C) jack
instead of VIDEO (CVBS) jack if the
connected device has the same S-VIDEO
input/output jack. This video connection
provides better picture quality.
21/3/05, 3:16 PM
Back of a Cable Box
or Satellite Receiver
(Example only)