Connecting The Audio Cables - Philips DVDR3360H User Manual

Step 1: Basic Recorder Connections
ANTENNA
TV
EXT

Connecting the audio cables

This connection enables you to listen to
the sound.
Option 1: Using an Audio cable
You can connect the recorder to a two
channel stereo system or receiver in
order to enjoy the stereo sound system.
Use the supplied audio cable (red/white
ends) to connect the AUDIO L/R
OUT1 or -OUT2 jacks to these devices
with the same input jacks.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
dvdr3360H-75_eng3.indd 16 dvdr3360H-75_eng3.indd 16
VIDEO
VIDEO
(CVBS) Y
(CVBS)
S-VIDEO
(Y/C)
L L P
B
AUDIO AUDIO
R R P
R
AUDIO
1
OUT 2 OUT 1
OR
Option 1
COAXIAL
DIGITAL AUDIO OUT
Option 2
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
Option 2: Using a Coaxial cable
You can connect the recorder to an AV
amplifi er/receiver in order to enjoy
multichannel surround sound.
Use a coaxial cable (not supplied) to
connect the COAXIAL jack to the
digital input on the AV amplifi er/receiver
with a digital multichannel sound
decoder.
Before you start operating, set the audio
settings accordingly (see page 65.)
If the AUDIO settings do not match your
amplifi er's capabilities, the amplifi er may
produce a strong, distorted sound or no
sound at all.
Helpful Hint:
– Do not connect your TV's audio output
jacks to the AUDIO L/R (IN-EXT) jacks on
this recorder, this may cause unwanted
noise.
(continued)
DIGITAL IN
AV amplifi er/
receiver
2005-10-17 3:12:31 PM 2005-10-17 3:12:31 PM