E Xample - GE MultiLink ML1600 Instruction Manual

CHAPTER 13: RAPID SPANNING TREE PROTOCOL
Configuring RSTP (continued)
ML1600(rstp)##
forceversion stp
ML1600(rstp)##
show-forceversion
Force Version : Force to STP only
ML1600(rstp)##
show stp config
RSTP CONFIGURATION
-----------------
Rapid STP/STP Enabled(Global) : YES
RSTP/STP Enabled Ports
Protocol
Bridge ID
Bridge Priority
Bridge Forward Delay
Bridge Hello Time
Bridge Max Age
Root Port
Root Path Cost
Designated Root
Designated Root Priority
Root Bridge Forward Delay
Root Bridge Hello Time
Root Bridge Max Age
Topology Change Count
Time Since Topology Chg
ML1600(rstp)##
forceversion rstp
ML1600(rstp)##
show-forceversion
Force Version : Normal RSTP
ML1600(rstp)##
show stp config
RSTP CONFIGURATION
-----------------
Rapid STP/STP Enabled(Global) : YES
RSTP/STP Enabled Ports
Protocol
Bridge ID
Bridge Priority
Bridge Forward Delay
Bridge Hello Time
Bridge Max Age
Root Port
Root Path Cost
Designated Root
Designated Root Priority
Root Bridge Forward Delay
Root Bridge Hello Time
Root Bridge Max Age
Topology Change Count
Time Since Topology Chg
ML1600(rstp)##
show-timers
Forward Delay Timer : 15 sec
Hello Timer
Max Age
(continued on next page)
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
: 9,10,11,12,13,14,15,16
: Force to STP only
: 80:00:00:20:06:25:ed:89
: 0
: 15
: 02
: 20
: 0
: 0
: 80:00:00:20:06:25:ed:89
: 0
: 15
: 02
: 20
: 0
: 100
: 9,10,11,12,13,14,15,16
: Normal RSTP
: 80:00:00:20:06:25:ed:89
: 0
: 15
: 02
: 20
: 0
: 0
: 80:00:00:20:06:25:ed:89
: 0
: 15
: 02
: 20
: 0
: 141
: 2 sec
: 20 sec
CONFIGURING RSTP THROUGH THE COMMAND LINE INTERFACE
The
forceversion
used for compatibility with STP
devices. In this example, the switch is
forced to STP mode.
Using
operating using RSTP. Note the
stp config
the switch protocol is RSTP.
capability can be
, the switch is now
forceversion
show
command also indicates
13–11