GE MultiLink ML1600 Instruction Manual page 220

CONFIGURING STP/RSTP WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE CHAPTER 13: RAPID SPANNING TREE PROTOCOL
13–22
Click the Edit button to configure RSTP.
Once in Edit mode, change the Status to Enable.
Save Configuration.
To reset RSTP back to normal mode, select "Normal RSTP" for the Protocol setting. Save the
configuration by clicking on the
Select the Configuration > RSTP > RO Mode menu as shown
below:
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
icon.
...THEN SAVE
ENABLE STATUS...