Power Cord; Extension Wand Placement; Operating Instructions - Kenmore 216.37000 Owner's Manual

EXTENSION WAND
PLACEMENT
Place the crevice toot (A) in the top of
the extension wand. Place the extension
wand (B) in the wand holder on the side
of the vacuum cleaner.
A
B
OPERATING INSTRUCTIONS
1. Turn the _r cord hook
to either ;e the
power
To r_ the risk
sho_apl
plug_lade is wider than
the _,his plug will fit in a
polari_fJ_let only one way. If
the plu_:_t'oes not fit fully in the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician to install the proper
outlet. Do not change the plug in
any way.
2. Detach the power cord
plug from the power cord.
Make sure the power
cord is placed into the
cord clip on the body as
shown.This helps keep
the power cord out from
under the vacuum cleaner
nozzle_
3, Plug the polarized
power cord into a 120
Volt outlet located near
the floor.
\
4, To store cord, turn upper cord hook to
the up position, then wrap cord.
WARNING
Personal Injury and Product
Damage Hazard
• DO NOT plug in if switch is in
the ON position. Personal injury
or damage could result.
, DO NOT use outlets above
counters. Damage from cord to
items in surrounding area could
occur.