Amplifier Controls - Electro-Voice ZLX-12P Owner's Manual

Amplifier Controls

The ZLX amplifier has a combination of controls and connectors to ensure the most versatile loudspeaker system. Each
component below has a description.
ZLX-12P & ZLX-15P Amplifier Panel
8
Figure 3:
1. LCD-DSP Control & Monitoring Interface
2. MASTER VOL—Turn the dial to the right to increase the
sound level or turn the knob to the left to decrease the
sound level.
DSP—Push and hold the MASTER VOL knob to
enter the DSP settings. Turn the MASTER VOL knob to
scroll through the menu items. Push the MASTER VOL
knob again to select the menu items.
3. AUX IN—3.5 mm audio jack input for connecting
external audio media devices, such as MP3 players.
4. INPUT LEVEL—Level control for adjusting the individual
input's sensitivity. LINE and MIC input level control is
available for both INPUT 1 and INPUT 2.
5. LINK OUTPUT—XLR output connector sends the
summation of all inputs' signals to another speaker or
subwoofer.
6. XLR/TRS INPUT—Balanced input for the connection
of signal sources like mixing consoles, instruments or
micorphones. Connections can be established using 1/4
inch TRS or XLR connectors.
7. MAINS IN—AC connection is established via an IEC-
connector. The ZLX amplifier operates between
100V-240V (+-10%).
8. POWER—AC switch for switching the power ON or OFF.
The LCD screen lights up when the POWER is turned ON.
Electro-Voice ZLX Series Owner's Manual