Electro-Voice ZX1i Series Installation Manual

Electro-Voice ZX1i Series Installation Manual

Hide thumbs Also See for ZX1i Series:

Advertisement

Quick Links

ZX1i Series Loudspeaker
en
Installation Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electro-Voice ZX1i Series

  • Page 1 ZX1i Series Loudspeaker Installation Manual...
  • Page 3: Table Of Contents

    ZX1i Series Loudspeaker Table of contents | en Table of contents Description Applicable products Parts included System features System overview Installation and wiring QuickSAM™ (Strong-Arm-Mount™) system Step by step installation 2.2.1 Mounting the QuickSAM™ bracket to the mounting surface 2.2.2 Selecting the voltage tap 2.2.3...
  • Page 4: Description

    EN54-24 type B certification 1438/CPR/0323 with TC-ZX1i cover (Sold separately) installed (Only available in select regions) The Electro-Voice ZX1i is the standard of no the DH2005, a 1.25 inch voice coil true compression compromise audio performance and versatility in an driver for maximum output with extended frequency easy to install compact package.
  • Page 5: System Features

    ZX1i Series Loudspeaker Description | en System features All ZX1i models use an 8-inch high-excursion LF driver and a 1-inch exit titanium compression driver on a rotatable horn to provide high-fidelity, full-range sound over a wide coverage area. The system also features the exclusive QuickSAM™ mounting system for easy mounting and aiming.
  • Page 6: System Overview

    | Description ZX1i Series Loudspeaker System overview Figure 1.2: ZX1i system overview A Sweep adjustment bolt (socket head B Enclosure attachment and rotation bolt A) adjustment bolt (socket head bolt B) C Dual low-frequency ports D Durable zinc-alloy steel grille E Cast aluminum Quick Strong-Arm- F 8-in.
  • Page 7: Installation And Wiring

    ZX1i Series Loudspeaker Installation and wiring | en Installation and wiring QuickSAM™ (Strong-Arm-Mount™) system To mount a speaker system with the QuickSAM™ system (Strong-Arm-Mount™): Securely attach the surface bracket to the wall or ceiling. Click the ZX1i™ enclosure onto the bracket.
  • Page 8 | Installation and wiring ZX1i Series Loudspeaker 70° rotation range 90° sweep range 70º 90º Refer to – Selecting the voltage tap, page 9 – Selecting the horn dispersion orientation, page 9 2022-01 | 04 | F.01U.177.815 Electro-Voice Installation Manual...
  • Page 9: Selecting The Voltage Tap

    ZX1i Series Loudspeaker Installation and wiring | en 2.2.2 Selecting the voltage tap Figure 2.1: Voltage tap selector (ZX1i-90T and ZX1i-100T models only) Selecting the voltage tap applies only to ZX1i-90T and ZX1i-100T models. Before attaching the speaker to the bracket: Select the proper voltage tap setting for your installation.
  • Page 10 | Installation and wiring ZX1i Series Loudspeaker Figure 2.2: Horn rotation (90° x 50° models only) 2022-01 | 04 | F.01U.177.815 Electro-Voice Installation Manual...
  • Page 11: Attaching The Speaker To The Quicksamâ„¢ Bracket

    ZX1i Series Loudspeaker Installation and wiring | en 2.2.4 Attaching the speaker to the QuickSAM™ bracket Figure 2.3: Attaching the speaker to the QuickSAM™ bracket To attach the speaker to the QuickSAM™ bracket: Insert the QuickSAM™ bracket (C) into the slot on the side of the speaker until it “clicks”...
  • Page 12: Wiring The Speaker

    | Installation and wiring ZX1i Series Loudspeaker 2.2.5 Wiring the speaker Caution! Touching uninsulated terminals or wiring may result in an unpleasant sensation. To wire the speaker: Connect the wires to the speaker using the detachable 4-pole Phoenix connector.
  • Page 13 ZX1i Series Loudspeaker Installation and wiring | en Test the complete system operation. Refer to Troubleshooting, page 15 for assistance in locating many speaker-related problems. Refer to – Troubleshooting, page 15 Electro-Voice 2022-01 | 04 | F.01U.177.815 Installation Manual...
  • Page 14: Detaching The Speaker From The Quicksam Bracket

    | Installation and wiring ZX1i Series Loudspeaker Detaching the speaker from the QuickSAM bracket To detach the speaker from the QuickSAM bracket: Loosen the socket head bolt B. Refer to System overview, page 6 . Press in the mounting tab while pulling the speaker away from the mounting surface.
  • Page 15: Troubleshooting

    ZX1i Series Loudspeaker Troubleshooting | en Troubleshooting Problem Possible causes(s) Action No sound Amplifier Connect a known working test speaker to the amplifier outputs. If there is no sound, check that all the electronics are on, the signal routing is correct, the source is active, the volume is turned up, and so on.
  • Page 16 Poor system grounding or Check and correct the ground loop system grounding, as required. If these suggestions do not solve your problem, contact your nearest Electro-Voice dealer or Electro-Voice distributor. 2022-01 | 04 | F.01U.177.815 Electro-Voice Installation Manual...
  • Page 17: Maintenance

    ZX1i Series Loudspeaker Maintenance | en Maintenance The ZX1™ system has been designed and manufactured to provide years of durability and reliable service. No routine maintenance is necessary. Cleaning To clean the speaker: Wipe with a soft, damp cloth. Caution! Cleaning the cabinet and grille Do not use abrasives such as sandpaper or steel wool.
  • Page 18: Technical Data

    | Technical data ZX1i Series Loudspeaker Technical data Frequency response (-3 dB) : 60 Hz - 20 kHz Frequency range (-10 dB) : 48 Hz - 20 kHz Rec. hi-pass frequency: 40 Hz Axial sensitivity : 94 dB (1W/1m)
  • Page 19 ZX1i Series Loudspeaker Technical data | en Dimensions (H x W x D): 451 mm x 282 mm x 263 mm (18 in x 11 in x 10 in) Net weight: 8.4 kg (18.5 lb) without transformer 10.4 kg (23.0 lb) with transformer Shipping weight: 10.2 kg (22.5 lb) without transformer...
  • Page 20 | Technical data ZX1i Series Loudspeaker 2022-01 | 04 | F.01U.177.815 Electro-Voice Installation Manual...
  • Page 21 ZX1i Series Loudspeaker Technical data | Electro-Voice 2022-01 | 04 | F.01U.177.815 Installation Manual...
  • Page 22 | Technical data ZX1i Series Loudspeaker 2022-01 | 04 | F.01U.177.815 Electro-Voice Installation Manual...
  • Page 24 Bosch Sicherheitssysteme GmbH Bosch Security Systems, LLC Robert-Bosch-Ring 5 12000 Portland Avenue South 85630 Grasbrunn Burnsville MN 55337 Germany www.boschsecurity.com www.electrovoice.com © Bosch Sicherheitssysteme © Bosch Security Systems, GmbH, 2022 LLC, 2022 202201251737...

Table of Contents