Table of Contents
Advertisement
2. In the upper part of the Trainer dialog box, select the segments or
• Tap the ink pattern to select it, tap it again to deselect. If there is
3. Tap the down arrow next to the As box and select the character
• If you cannot find the character you want in the list, select Other.
• You can also use the stylus to write the text character you want
• No matter how you specify a character, the character in the As box
4. Tap the Train button to train the character and save your changes
5. Tap the close box
Other Symbols
If the character you want is not in the list, select Other from the list to
open the Train Symbol dialog box.
The Train Symbol dialog box provides a selection of non-standard
and international symbols. Tap the character you want on the Train
Symbol dialog box to select it, and then tap OK.
The following functions are also available on the Trainer dialog box.
• Tap the Undo button if you made a mistake and want to "untrain"
• Tap the Macro button when you want to train the selected ink
74
parts of the ink pattern that you want to use as a character.
more than one stroke, make sure you select all the strokes that
are part of the character. The strokes you select appear in the
Trainer dialog box, which shows the ink pattern that will be used
for recognition.
from the list that appears.
See "Other Symbols" below.
directly into the As box.
will be associated with the ink pattern in the Trainer dialog box.
to the Library of Models.
the character.
pattern as a character string, macro, or gesture. Tapping Macro
displays the Train Macro Wizard, which shows the selected ink
pattern. See "Macros & Gestures" on page 75 for more information
about this dialog box.
to close the Trainer dialog box.
Advertisement
Table of Contents
