Table of Contents
Advertisement
• Two battery packs can be attached at the same time, and they can
be attached in any order. Of course operation with only one battery
pack is also possible.
To remove the battery pack
Before removing the battery pack, be sure to turn off the power when
the AC adapter is connected to FIVA and a power outlet you can
remove the battery pack without turning off the power. Also, when two
battery packs are attached, one can be removed without turning off
the power.
• If you remove the battery pack while the power of the FIVA is
turned on without connecting the AC adapter, data may be
erased. Also, if you remove the battery pack while FIVA is in
Stand-by Mode, data may be erased. To prevent data from
erasing, be sure to connect the AC adapter.
The charged battery pack can be replaced by the "hot swap"
function even if the power is turned on when the battery pack is
attached on one side.
1. Turn over the FIVA.
2. Hold the battery pack hook while sliding the battery release latch
(q) and after sliding the battery release latch on the side to be
removed, pull out the battery (w).
Make sure you have a firm grasp of the battery pack when you
pull it from FIVA. Dropping the battery pack can cause it to fall
on your foot or otherwise cause personal injury.
wLift up while sliding to the
left side holding the hook.
qSlide the battery release latch.
1
33
Advertisement
Table of Contents
