Audio Control - Kenwood KDC-X997 Instructions Manual

KDC-X997/KDC-BT955HD/KDC-X897/KDC-BT855U/KDC-X697/KDC-655U/KMR-555U

5-1. Audio control

5-1. Audio control
You can adjust the audio control items.
1. Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob.
Refer to <Source
2. Press [Control] knob.
Enters the Function setting mode.
3. Select "Audio Control" using [Control] knob.
For how to use [Control] knob, refer to
4. Select a audio control item using [Control] knob.
Display
"SubWoofer Level"
"Preset
Equalizer"[1][5]
"Manual
Equalizer""[1][5]
"Pro Setup"
"DSP Set"
"Car Type"[5]
"Speaker
Setting"[5]
"X'Over"[5]
"DTA Settings"[5]
"Sound Enhancements"[5]
"Supreme"[6]
"HIGHWAY-
SOUND" [3]
"Space
Enhancer"[3]
[4]
"Sound
Realizer"[4]
"Sound
Elevation"[4]
"Volume offset"
"SubWoofer
Mute"
"Audio Preset"
"Bass Boost"[5]
"Loudness"[5]
"Balance"
"Fader"
(Colored text: Factory setting)
selection>.
<3-3. How to select the
Overview
You can set subwoofer level.
"–15" — "0" — "+15"
Select from among preset equalizer curves to set the sound quality.
"User"[2]/ "Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top 40"/ "Jazz"/ "Powerful"/ "iPod"(During iPod
source only)
Set the equalizer curve manually.
Refer to <5-2. Manual equalizer
Turn on/off the DSP function.
"Bypass": Disables the DSP function.
"Through": Enables the DSP function.
To get clear sound, set the sound environment according to the location and size of physically
installed speakers with reference to the followings:
<5-3. Car type selection>
<5-4. Speaker setting>
<5-5. X'Over setting>
<5-6. Listening position setting>
<5-7. Delay time control>
<5-8. Channel level fine adjustments>
Turns ON/OFF the Supreme function.
Can be set while Audio file source of USB/CD and iPod source.
"ON"/ "OFF"
Compensates the low volume or bass sound being lost by road noises to make vocal sound clearer.
"OFF"/ "Low"/ "Middle"/ "High"
Virtually enhances the sound space using the DSP.
"OFF"/ "Small"/ "Medium"/ "Large"
Virtually makes the sound more realistic using the DSP.
"OFF"/ "Level1"/ "Level2"/ "Level3"
Virtually raises the sound field using the DSP.
"OFF"/ "Low"/ "Middle"/ "High"
Sets each source's volume as a difference from the basic volume.
"–8" — "0" (AUX: "–8"— "+8")
Sets the Subwoofer Mute.
"ON"/ "OFF"
You can register the values set the Audio control items.
Refer to <5-10. DSP preset>,
Sets the Bass Boost level in 3 steps.
"OFF"/ "Level1"/ "Level2"/ "Level3"
Makes the sounds at high and low frequencies louder.
"OFF"/ "Low"/ "High"
Adjusts left/right speaker balance.
"Left15" — "0" — "Right15"
Adjusts front/rear speaker balance.
"Rear15" — "0" — "Front15"
item>.
control>.
<5-11. DSP preset recall>.
5. DSP settings (KDC-X997, KDC-BT955HD)