Kenwood KDC-X997 Instructions Manual page 29

KDC-X997/KDC-BT955HD/KDC-X897/KDC-BT855U/KDC-X697/KDC-655U/KMR-555U
5-9. Resetting of DTA Settings
5-9. Resetting of DTA Settings
You can reset the DTA-compensated values to the factory settings.
1. Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob.
Refer to <Source
2. Press [Control] knob.
Enters the Function setting mode.
3. Select "Audio Control"
knob.
For how to use [Control] knob, refer to
4. Select "YES" using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
selection>.
> "Pro Setup"
<3-3. How to select the
> "DTA Settings" >
5. DSP settings (KDC-X997, KDC-BT955HD)
"Reset DTA Setting" using [Control]
item>.