Kenwood KDC-X997 Instructions Manual page 120

KDC-X997/KDC-BT955HD/KDC-X897/KDC-BT855U/KDC-X697/KDC-655U/KMR-555U
17. Bluetooth audio (KDC-X997, KDC-BT955HD, KDC-X897, KDC-BT855U)
17-2. Basic operations
Selecting a Bluetooth audio source
1. Press [SRC].
Enters the Source selection mode.
2. Select a Bluetooth audio ("BT AUDIO") source using [Control] knob.
Refer to <Source
Pause and play a song
Press and hold [1/6].
Selecting a song
Press [E] or [F] button.
Fast-forwarding or fast-backwarding a song
Press and hold [E] or [F].
Selecting an audio file folder
Press [R] or [S] button.
Preparation for using the Bluetooth audio player
All or some of the operations above cannot be performed if the Bluetooth audio player is not ready for
remote control.
Switching between Bluetooth audio sources does not start or stop playback automatically. Perform the
operation for starting or stopping playback.
Some audio players cannot be controlled remotely or reconnected after Bluetooth disconnection.
Operate the main unit of the audio player to connect a Bluetooth device.
selection>.
17-2. Basic operations