Kenwood KDC-X997 Instructions Manual page 33

KDC-X997/KDC-BT955HD/KDC-X897/KDC-BT855U/KDC-X697/KDC-655U/KMR-555U
6-2. Playing music
Playing a iPod
Connect the iPod to the USB terminal using the KCA-iP102 (optional accessory).
[1] Front USB terminal
[2] Rear USB terminal
You can connect the iPod to either one of the USB terminals provided at the front and rear of this unit.
If you connect a device to the USB terminal provided at the rear, the "REAR USB" indicator stays lit.
When it is connected, the source is switched automatically and playback starts.
Selecting a song
Press [E] or [F] button.
Fast-forwarding or fast-backwarding a song
Press and hold [E] or [F].
Pause and play a song
Press and hold [1/6].
Removing iPod
Switch the source to a device other than iPod, Pandora, Aha Radio, and iHeartRADIO, and then
remove the iPod.
Data contained in the iPod may be damaged if you remove it when it is used as the active source.
When playback of iPod touch or iPhone does not start
If an unsupported application has started when connecting iPod touch or iPhone, "APP & iPod Mode"
appears and sometimes playback does not starts. In this case, APP & iPod Mode is set to "OFF". Refer
to <6-9. App & iPod mode setting search>.
6. Listen to the iPod 6-2. Playing music