Bluetooth Detail Setting - Kenwood KDC-X997 Instructions Manual

KDC-X997/KDC-BT955HD/KDC-X897/KDC-BT855U/KDC-X697/KDC-655U/KMR-555U
18. Bluetooth settings (KDC-X997, KDC-BT955HD, KDC-X897, KDC-BT855U)

18-6. Bluetooth detail setting

You can configure the initial settings of this unit.
1. Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2. Select "Settings"
For how to use [Control] knob, refer to
3. Select a Bluetooth detail setting item using [Control] knob.
Display
"Auto Answer"
"Auto
Reconnect"
"Auto Pairing"
"Bluetooth
HF/Audio"
"Call Beep"
"MIC Gain"
"Echo Cancel
Level"
(Colored text: Factory setting)
4. Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Bluetooth mode
Press [Ú].
> "Detailed Settings" using [Control] knob.
Description
Automatically answers a call after lapse of the preset time interval.
"OFF": Does not answer the phone call automatically.
"1SEC" – "8SEC" – "99SEC":
Automatically answers the phone call after lapse of 1 – 99 seconds.
When set to "ON", starts re-pairing with the registered Bluetooth device automatically when it becomes
unpaired.
"ON" / "OFF"
When set to "ON", the Apple Auto Pairing function is turned on to automatically register the iPod touch or
iPhone connected to this unit.
"ON" / "OFF"
Specifies the output speakers for hands-free voice communication and Bluetooth audio sound.
"Front" : Outputs sound from the front speakers.
"All" : Outputs sound from the front and rear speakers.
Sets whether to output a beep from the speaker when a call comes in.
"ON" : Outputs a beep.
"OFF" : Does not output a beep.
Adjusts the sensitivity of the microphone for telephone call or adjusts the voice of the caller.
"-20" – "0" – "+8"
Sets the echo cancellation level.
"1" – "4" – "10"
18-6. Bluetooth detail setting
<3-3. How to select the item>.