Chassis Physical Overview
This chapter briefly describes the chassis configuration and components of the Cisco ASR 9000 Series
Routers. For information on the Cisco ASR 9001 and Cisco ASR 9001-S Routers, see:
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Cisco ASR 9010 Router
The Cisco ASR 9010 Router chassis is centered around a redundant pair of RSP cards, along with eight
line cards. The 10-slot chassis size fits in Telco, EIA, and ETSI racks and cabinets.
The version 1 power system has three power modules in each of two power trays. The version 2 power
system has four power modules in each of two power trays.
Figure 1-1
Figure 1-2
Figure 1-1
Cable management
tray
Two center slots
reserved for
redundant RSPs
Eight slots
(four on each side)
for line cards
Two fan trays
Front air intake
Six AC/DC or DC/DC
power modules
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
1-2
shows the slot locations for the chassis with version 1 power trays.
shows the slot locations for the chassis with version 2 power trays.
Cisco ASR 9010 Router Chassis Components—Version 1 Power Trays
Chapter 1
Overview and Physical Description
Rear air exhaust
Rack mount bracket
OL-17501-09