Table of Contents
Advertisement
Changing Passcodes
I have this feature.
I do not have this feature.
This feature lets you change your personal passcode at any time, without
assistance from your alarm company. It is recommended that you write
down your old passcode and the new one before you begin.
1.
Make sure your system is off (On light is off).
2.
Press the [5] key. The OK tone sounds and the display changes to:
3.
Enter your current passcode. As you enter digits, the display shows:
4.
If the passcode you entered is valid, you are prompted to enter your
new passcode:
5.
Enter a new passcode with the same number of digits as your old
passcode. If the error tone sounds, try a different new passcode.
6.
If you entered a valid new passcode, the display changes to:
7.
Enter your new passcode again. As you enter digits, the display
shows:
8.
The display shows the following to confirm the change, and leaves
the change passcode mode. If the error tone sounds, start over:
24
ENTER OLD CODE
ENTER CODE
ENTER NEW CODE
ENTER CODE
ENTER NEW AGAIN
ENTER CODE
CODE CHANGED
Advertisement
Table of Contents
