Table of Contents
Advertisement
Viewing Alarm Memory
After an alarm has been silenced and cleared from the display, you may still
review the points that had been in alarm.
1.
Ensure the system is turned off (On light is off).
2.
Press the [4] key. The following display shows that there are alarms
in memory:
3.
Press the [6] key to view those points which were in alarm. This
display shows that there was an alarm on point 8:
4.
If you entered your passcode before the system dialed your alarm
company, the display shows:
5.
Continue to hold the [6] key to view all points that were in alarm.
When the last alarm has been shown, the display shows:
6.
Turn the system on again to clear alarm memory.
ALARM MEMORY
HOLD 6 TO VIEW
ALARM PT 8
BEDROOM WINDOW
CANCELED PT 8
BEDROOM WINDOW
TO CLEAR MEMORY
TURN SYSTEM ON
19
Advertisement
Table of Contents
