Table of Contents
Advertisement
Resetting the System
Use this feature to reset the system (including fire points) after an alarm.
Detection devices, such as smoke detectors and shock sensors, must be
reset after being activated. Resetting the system takes about 20 seconds. If
points do not reset, contact your alarm company for help.
1.
Ensure your system is off (On light is off).
2.
Press the [3] key. The display shows the following:
3.
Enter your passcode (Owner type passcode required). Resetting
begins and the display shows the following. This procedure takes
about 20 seconds:
4.
After the system is reset, the display returns to the off state.
20
ENTER CODE TO
RESET SENSORS
RESETTING...
Advertisement
Table of Contents
