Connecting Devices To The Rack Model - Fujitsu PRIMERGY Econel 100 Operating Manual

Connecting Devices to the Rack Model

4.4 Connecting Devices to the Rack Model
The ports for external devices are on the front and on the rear of the server.
Which additional ports are available on your server depends on the PCI boards
installed. For further information please consult the "Options Guide" (see
ography" on page
The standard ports
coded.
1
8
Figure 2: connections
1 Mouse port (PS/2) (green)
2 Parallel port (burgundy)
3 LAN connection (RJ45)
4 USB0 port 1 and 2 (black)
I
Some of the devices that can be connected may require special drivers
(see the documentation for the connected device).
Ê Connect the data cables to the server and peripherals.
Two further USB ports are located on the front of the server (see
page 31).
28
55).
(figure 2) are marked with symbols, and some are colour-
7 6
Operating Manual
2
5
5 Monitor port (VGA) (blue)
6 Serial port COM1 (turquoise)
7 USB1 port 1 and 2 (black)
8 Keyboard port (PS/2) (purple)
Hardware Installation
"Bibli-
3
4
figure 4 on
Econel 100