Step 7 - Connect Your Modem To The Telephone Line - Multitech MultiModem MT5634ZPX Quick Start Manual

MultiModem ZPX Quick Start Guide
3. Click Query Modem. The system will pause for a few seconds while trying to access
the modem. The modem will respond to the AT commands sent by the system.
4. The modem response will display in the Command I Response pane.

Step 7 - Connect Your Modem to the Telephone Line

The MultiModem communicates over public-switched telephone network lines. Use the
modular telephone cable provided with the modem to connect the MultiModem to your
telephone wall jack. If you don't have a standard modular wall jack near your computer,
install one or have one installed for you by your telephone company. In the U.S.,
installation kits and adapters are available wherever telephones are sold.
1. Plug one end of the supplied modular telephone cable into the LINE jack.
2. Plug the other end of the telephone cable into a working wall jack.
MT5634ZPX Internal ISA Modem
9