Replacing Shelves, Bins And Racks - GE Refrigerator Owners And Installation Manual

About the shelves, bins and racks.
Not all features are on all models.
Refrigerator Door Bins and Freezer Door flit-Out Bins
Refrigerator bin
Freezer tilt-out bin
LargeBins
The larger refrigerator door bins and
freezer tih-out door bins are adjustable.
TO remove: Lift tile front of the bin straight
up, then lift up and out.
TO replaceor relocate:Engage the back side
of the bin in tile molded supports of the
door. Then push down on tile front of the
bin. Bin will lock in place.
Small Bins
TO remove: Lift tile front of the bin straight
up then out.
TOreplace: Position the bin above the
rectangltlar molded supports on the door.
Then slide the bin down onto the support
to lock it in place.
Thesnugger helps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Place a finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.
CAUTION: Be
carefulwhenplacing
itemsin thetopbin.
Makesurethat
itemsdenotblack
orfall intotheice
chute.
Door Wine/Beverage Rack (on some models)
This rack holds up to 5 cans, one bottle of
wine or one 2-liter bottle of soda.
The rack hangs fi'om the sides of the
dairy bin.
Toremove:
O Empty the wine/beverage rack.
O Holding the bottom of the dairy bin,
lift the fi'ont sn'aight up, then lift up
and out.
Toreplace:
_ Reattach the rack to the sides
of the bin.
_ Eng'age the back side of the bin in
the molded supports on the door.
Then push do-an on the front of the
bin. The bin will lock into place.
To detach the rack from the dairy bin,
pull the rack's side wires out of the
holes on each side of the dairy bin.
8