How To Install Features; Shelves And Bins - GE GSL25JFTABS Manual

How to install features.

¿
TOP FREEZER SHELF
Make sure the shelf front locks into
position.
Top Freezer Shelf
Δ
FREEZER DOOR SHELF FRONTS
Make sure that the shelf front locks
into position.
NOTE: On dispenser models, the
longer shelf fronts go in the top
two positions.
Door
Shelf Front
To remove: Lift the shelf extender
straight up, then pull out.
To replace: Engage the shelf
extender in the molded supports
of the door and push in. It will
lock in place.
About the shelves and bins.
Rearranging the Shelves
Refrigerator Shelves:
To Remove
Tilt up
Lift up and out
4
(Not all features are on all models.)
¡
FILTER CARTRIDGE
Remove Bypass Plug
Door
Shelf
≈
LOWER FIXED DOOR BINS
Make sure the bin fronts lock into position.
Lower Door Bin
(Not all features are on all models.)
To Replace
Insert
top hook
Lower to
lock in
place
Install Filter Cartridge
Freezer Pan:
To Remove
Remove the pan by pulling it
forward, lifting up the front
and sliding it past the stop
location.
¬
DAIRY COVER
√
BOTTLE RETAINER
ƒ
ADJUSTABLE
DOOR BINS
DOOR BIN SNUGGERS
To remove: Lift the
front of the bin up,
then pull out.
To replace or relocate:
Engage the bin in the
molded supports of
the door, and push
in. Bin will lock in
place.
Freezer Shelves:
To Remove